Dry Clean Only
Warm Iron On Reverse
Listed sizes refer to the size of each curtain
Sold as pairs, each curtain measuring the size stated. For example in a pair of curtains measuring 46"x54" , there will be two curtains each measuring 46" wide and 54" in length.
To calculate the size of curtain you require, the total width of the curtains should be no less than one and a half the width of your window. To achieve a full and luxurious look, we recommend increasing the fullness to double the width of your window.
Before deciding on length of your curtains, we recommend you fit your track or pole. Before measuring for the length, you must decide whether your curtains should fit to the sill, below the sill or to the floor. When measuring for the length of your curtain we recommend the following should be taken into account:
Sill length: curtains should finish approximately a half inch (1.5cm) above the sill
Below sill length: curtains should finish approximately 4-6" below the sill for the best effect.
Floor Length: curtains should finish approximately a half inch (1.5cm) above the floor.
When using eyelet curtains we recommend you measure from the top of the curtain pole to where you would like the curtains to finish. Also, please ensure there is at least 1.5" to 2" clearance above your curtain pole.
The above allowances will ensure you get the best from your curtains.
Lined pencil pleat curtains
Ready to hang
Hanging instructions included
Curtain hooks are not included